What are the common troubleshooting methods for Cheap Triplex Plunger Pump parts products

2022/09/23

1. The plunger of the Cheap Triplex Plunger Pump parts products has scars and corrosion and should be replaced with new products if necessary.
2. The sealing performance of the plunger pair. Hold the plunger sleeve with your hand and block the oil inlet on the top and side of the plunger with two fingers. Use the other hand to pull out the plunger of the Cheap Triplex Plunger Pump parts, feel a greater suction, relax the plunger and immediately retract to the original position, indicating that the plunger pair is well sealed, otherwise the plunger pair should be replaced.3. The pressure relief ring belt of the oil outlet valve pair of the Cheap Triplex Plunger Pump parts products is worn with steps or scars and should be replaced if necessary.
4. Auxiliary seal of the oil outlet valve. Use your finger to block the lower hole of the oil outlet valve of the Cheap Triplex Plunger Pump parts, and use another finger to gently press the oil outlet valve down. When the finger leaves the upper end of the oil outlet valve, it can automatically bounce back to its original position, indicating that the oil outlet valve pair is well sealed, otherwise, the oil outlet valve pair should be replaced.
5. When the gap between the plunger flange of the Cheap Triplex Plunger Pump parts products and the groove of the control sleeve is too large, the control sleeve must be replaced.

Cheap Triplex Plunger Pump parts products,Cheap Triplex Plunger Pump parts,Triplex Plunger Pump parts products

Advantages of Triplex Plunger Pump parts components

Back to news list ➜

Dongda

What are the common troubleshooting methods for Cheap Triplex Plunger Pump parts products

Dong da